Webroy

INDEX | CARS | GRID VIEW | DASHBOARD | PRODUCTION SYSTEM | QUALITY MANUAL | SUGGESTIONS |

MANUFACTURING QUALITY CHART

COMPILED BY		TEAM MEMBER 2
TEAM MEMBER 3		TEAM MEMBER 4
SUPPLIER	Webroy (Pty) Ltd	MQC No
CUSTOMER		REV No.
PART NAME		DATE INITIATED
PART No.		REVISION DATE	2022/06/09
		LAST REVIEW DATE
WEBROY STOCK CODE		STATUS
MANUFACTURING LOCATION	Webroy	SAFETY CRITICAL
MQC TYPE
Current

Process Flow Key

Process Type	Image
PARTS STOCK
COMPONENT PART
PROCESS OPERATION
SAMPLING INSPECTION
100% INSPECTION
TRANSPORT

Responsible
Confirmation Level Key

Name	Image
OPER
T/L
SUPERVISOR
MNGR
OPER
T/L
SUPERVISOR
MNGR

PROCESS FLOW	NO	NAME	WORK ELEMENT	CHECK ITEM	RANK	PROCESS CRITERION	INSPECTION METHOD	INSPECTION PLAN	FREQUENCY	Inspection No.(s)	Work Instructions	RESP	CHECK SHEET	CONFIRM'N LEVEL	REACTION PLAN
	1	Receiving and verification of raw material	Receiving	Raw material		Check for correct quantity delivered, type and diameter (4.5mm)	Visual inspection and verification as per order	Delivery note and order	Every batch				Goods receive notebook / delivery note		Should there be any discrepancies inform production planner / supplier immediately and make a note on P.O.D
	2	Move material to receiving storage area	Transport	Raw material		Store material correctly	Visual inspection	As per FIFO system	Every batch				Visual inspection and FIFO board		If difficulty occurs in storing raw material properly inform Stores Coordinator
	3	Inspection of raw material by QA personnel	Inspection	Raw material		Mild black wire. SAE 1010/1008. WIRE/MBH2/0450. Correct diameter 4.5mm +/- 0.08. No score marks, no rust on wire and correct tensile- 550mpa to 750mpa	Visual inspection and Micrometer	As per incoming raw material inspection QD207	Every consignment	6163	1120		Goods receive notebook / Buff tag and record findings on electronic system.		Any non-conforming raw material shall be placed on hold and isolated. Raise SRAN and inform Stores Coordinator
	4	Move raw material to dedicated area for storage	Transport	Raw material		Safe stacking of wire coils as per allocated areas and FIFO system	Visual inspection	As per FIFO system	On receiving				FIFO information board and identification tags		Any difficulty experienced during this activity report to Stores Coordinator
	5	Issue wire to production	Issue wire to production	Raw material	SC	Correct wire to be issued as per job card	Verification as per buff tag and Setter to measure wire diameter with vernier	Every coil issued to production	Every job as per request				Route card		Should the incorrect wire be issued to production stop process, correct and inform Stores Coordinator
	6	Form wire on Zukron	Forming	Wire form	SC	Form wire as per checking fixture. Fitment - Part must drop fit nn C/F. Parts Must Sit Flush In C/F Grooves. Harmfull Burrs Not Allowed. No Score Marks On Parts. No Rust On Parts. Legs parallel. Width dimension = 20.5mm +/- 1.	Visual Inspection and verification on final checking fixture. First-off verification by Q.A	As per work instruction	First-off at start of production. In-process 9 parts every hour and last off	4078 4079 10344	1092		Record on electronic system		Should the first-off sample fail stop process and reset machine and re-do first-off
	7	Packing of final product	Packing	Product		Correct quanity = 100 per bin. Bin No. 4316	Visual	As per supplier packaging specification	Every job				F/A Card		Should the quantity be incorrect, stop process, verify quantity and add/remove products to meet quantity required
	8	Transport product to stores	Transport	Product		Correct quantities	Visual inspection	As per works order	Every batch				F/A Card		Should difficulty occur during transport inform Supervisor
	9	Receipting product to stores	Receipting	Product		Correct quantity to be entered on to the stock system	Visual	Every batch	Every order		1094		F/A Card		Any discrepancies shall be reported to the Stores Coordinator
	10	Dispatching of products	Transport	Product		Correct loading of bins and safe handling during transport activity	Visual	Entire order	Every order		1101		Delivery note / invoice		Any difficulty experienced during this activity report to Stores Coordinator
	11	Layout functional inspection	Inspection	Product	SC	Full dimensional	As per customer requirements	1 Complete product	As per schedule				Audit sheet		Should the functional layout fail the Production manager shall be informed immediately.